Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
SCC-LP05 Request for Availability
SCC-LP05, ±10 V, 11.025 kHz, 777459-30 Lowpass Filter Module
Rated 4.9/5 | 10 ratings
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Ground Shipping
✔ NIST Calibration Available
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Carol Zimme**** Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
National Instruments SCC-LP05 Lowpass Filter Module
The SCC-LP05 (Part Number: 777459-30) is a 2-channel lowpass filter module specially designed for signal conditioning applications. Each channel has a fourth-order Butterworth filter; thus, the 11.025 kHz cutoff frequency is realized. The SCC-LP05 can be ideally used for attenuation of high-frequency components present in the input signals. It offers a smooth passband with sharp rolloff. SCCC-LP05 accepts ±10 V differential input signals, scaling the output in the range of ±5 V after attenuation and filtering. These devices perform excellently, either in single stage or in cascade operation with the dual-stage.
This module provides compatibility with both SCXI and legacy National Instruments systems, offering users great flexibility when working on measurement and automation applications. The SC-2345 carrier connectors make it connectable to provide integration with E Series DAQ devices using a 68-pin cable. This SCCLP05 also provides an assurance of signal clarity by ensuring that frequencies that could cause aliasing are well attenuated through the strong Butterworth design characteristic of this particular unit.
Physically, the SCC-LP05 is 8.89 cm x 2.92 cm x 1.85 cm in dimensions and weighs about 37 grams. The 20-pin connector and screw terminals make it easy to integrate the module into systems. Built for reliability, the SCC-LP05 supports operating temperatures from 0°C up to 50°C and has protective mechanisms against electrical and environmental hazards installed for compliance with the respective international safety and electromagnetic compatibility standards.
The SCC-LP05 is used in most industrial automation, data acquisition, and laboratory test applications requiring precise lowpass filtering to assure accurate signal processing. The filter has been used to great effect in dealing with high-frequency noise in audio analysis and vibration monitoring, among other applications including general-purpose filtering tasks, due to its simple design and efficiency, and has therefore been widely accepted among engineers looking for reliable signal conditioning performance.
| Model Name | SCC-LP05 |
|---|---|
| Part Number | 777459-30 |
| Part Type | Lowpass Filter Module |
| Number of Channels | 2 Differential Input Channels |
| Cutoff Frequency | 11.025 kHz |
| Filter Type | Fourth-order Butterworth |
| Input Signal Range | ±10 V |
| Output Signal Range | ±5 V |
| Input Impedance | 10 GΩ (powered on); 10 kΩ (off/overload) |
| Dimensions | 8.89 cm × 2.92 cm × 1.85 cm |
Associated part numbers for SCC-LP05:
Delivery:
No hassle return policy.
Dedicated customer service team.
Payment:
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos:
Why Buy From Apex Waves:
