Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
NI-9218 In Stock | Ships in 3-5 Days
NI-9218, 2-Channel, C Series Universal Analog Input Module
Rated 4.7/5 | 13 ratings
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Ground Shipping
✔ NIST Calibration Available
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Carol Zimme**** Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
National Instruments NI-9218 C Series Universal Analog Input Module
The NI‑9218 (Part Numbers: 783362-01 and 783367-01) is a C Series Universal Analog Input Module, which can be used for multipurpose estimations and comes with two channels and 51.2 kS/s per channel sample rate. In addition, this module provides support for different elements such as accelerometer, powered sensor, full-bridge, and voltage measurements, as well as quarter-bridge, half-bridge, 60 V, and current estimations utilizing measurement-specific adapters. Each channel can be selected individually, so it is possible to work with different estimations on each channel. The NI 9218 is the most suitable and recommended choice for making widespread test systems for vehicles, off-highway, and information logging frameworks.
First, there is full-bridge mode signal conditioning available on this module. When it is fully connected, the simple information associations sense at that point intensify the approaching simple signal and the excitation associations provide a differential scaffold excitation voltage. To add more information, remote detecting constantly and natural remedies for lead-wire incited excitation voltage misfortune when utilizing the RS associations and finally shunt alignment can be utilized to amend for lead-wire instigated desensitization of the scaffold.
Another mode is the ±5 V IEPE, where the approaching simple signal is referenced to a segregated ground. Each channel is designed for AC coupling with an IEPE current and gives a TEDS Class 1 interface.
The NI 9218 utilizes a mix of simple and computerized sifting to give a precise portrayal of in-band signals, while dismissing out-of-band signals. The filter segregates between signals in view of the frequency range, or transmission capacity, of the signal. The three essential data transfer capacities to consider are the passband, the stopband, and the alias-free bandwidth.
| Model | NI-9218 |
|---|---|
| Manufacturer | National Instruments |
| Part Numbers | 783362-01, 783367-01 |
| Type | C Series Universal Analog Input Module |
| Differential Analog Input Channels | 2 |
| Maximum Sample Rate | 51.2 kS/s per channel |
| Analog Input Isolation | 60 VDC Ch-Ch Isolation |
| Front Connector | D-Sub or LEMO |
| Weight | D-Sub- 5.33 oz; LEMO- 5.82 oz. |
| Warranty | 2-3 Year Warranty |
| NI-9218 Manual | User Manual and Maintenance Manual Available for Download |
| Price | Contact a sales representative for a quote. |
Associated part numbers for NI-9218:
National Instruments NI-9218 Frequently Asked Questions
Question: What is the difference between the two part numbers for the NI-9218?
Answer: The NI-9218 has two front connectors available: the NI-9218 with D-SUB connectors is part number 783362-01 and the NI 9218 LEMO model is part number 783367-01.
Question: Which types of sensors are supported by the NI 9218?
Answer: The NI 9218 supports accelerometers, bridges, IEPE, and powered sensors.
Question: How long is the NI 9218 calibration interval?
Answer: The NI 9218 calibration interval is two years.
Question: What is the ADC resolution of the NI-9218?
Answer: The ADC resolution of the NI-9218 is 24 bits.
Delivery:
No hassle return policy.
Dedicated customer service team.
Payment:
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos:
Why Buy From Apex Waves:
