Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
NI-9467 Request for Availability
NI-9467, 50 Ohm, SMA Female Connector, C Series, GPS Synchronization Module
Rated 5/5 | 11 ratings
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Ground Shipping
✔ NIST Calibration Available
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Carol Zimme**** Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
National Instruments NI-9467 C Series GPS Synchronization Module
The NI 9467 GPS Module (Part numbers: 781632-01, 151799E-01L) delivers precise time synchronization to NI CompactRIO systems. Users can employ the NI-9467 for these applications: power quality assessment systems, wind farm monitoring systems, bridge and large building structural health monitoring systems, and electrical grid phasor measurement units (PMUs). The NI-9467 has +5 VDC or 30 mA maximum for the active GPS antenna, a SMA female antenna connector type, CompactRIO support, and does not work for mobile applications.
National Instruments recommends utilizing the NI 9467 with the NI FPGA Timekeeper. The FPGA Timekeeper s LabVIEW FPGA IP created to integrate the CompactRIO onboard FPGA clock with external timing sources, including: GPS, SNTP, and IRIG-B. When the FPGA Timekeeper is used with the NI 9467 GPS Synchronization Module, the FPGA Timekeeper timestamps every tick of the 40/80 MHz clock with real-world time, exact to around ±100 ns. The device has an input impedance of 50 ohms. It has a power consumption of up to 150 mA from the chassis when active, and 1 mA in sleep mode.
The NI 9467 GPS Module has many valuable features. A low-power sleep mode is available but depends on the chassis the module is plugged into. Not all chassis will support the sleep mode. While in sleep mode, the NI 9467 refrains from tracking satellites and is not powered. A GPS signal strength between -135 dBm and -120 dBm is recommended at the NI-9467 SMA input. This C Series GPS Synchronization Module also has a front panel LED. For example, solid green indicates normal operation. Solid yellow indicates that there is an antenna error. Blinking green means the module is performing survey. Blinking yellow means there are either not enough or any satellites. Lastly, when the LED state is off, it indicates the module is unconfigured.
The NI-9467 weighs 4.5 oz. It has recommended operating and storage temperature ranges of -40 °C to 70 °C and -40 °C to 85 °C respectively, non-condensing operating and storage humidity ranges of 10% RH to 90% RH and 5% RH to 95% RH respectively, random and sinusoidal operating vibrations of 5 grms and 5 g–all at a frequency range of 10 to 500 Hz.
| Model | NI-9467 |
|---|---|
| Manufacturer | National Instruments |
| Part Numbers | 781632-01, 151799E-01L |
| Series | C Series |
| Type | GPS Synchronization Module |
| Supported Models | CompactRIO |
| Input Impedance | 50 Ohms |
| Overvoltage Protection | ± 30 VDC |
| Input Impedance | 50 Ω, Nominal |
| Power Requirement | 150 mA Max (Active Mode), 1 mA (Sleep Mode) |
| Antenna Connector Type | SMA Female |
| Operating Temp Range | -40 °C to 70 °C |
| Storage Temp Range | -40 °C to 85 °C |
| Weight | 4.5 oz. |
| Warranty | Three Year Warranty |
| NI-9467 Manual | User Manual and Maintenance Manual Available for Download |
| Price | Request a Quote Today for Pricing Information |
Associated part numbers for NI-9467:
National Instruments NI-9467 Frequently Asked Questions
Question: What are the power requirements for the NI-9467 GPS Module?
Answer: The module has a power requirement of 150 mA maximum while in active mode and 1 mA while in sleep mode.
Question: What is the over-voltage protection for the NI-9467?
Answer: The over-voltage protection measures ± 30 VDC.
Question: What signal type does the NI-9467 have?
Answer: The Synchronization Module has an L1 frequency with a GPS C/A code signal.
Question: Which accessories are recommended for use with the NI-9467?
Answer: A GPS antenna, a magnetic mount, and a 5 m cable with SMA are recommended to be used with the GPS Sync Module.
Delivery:
No hassle return policy.
Dedicated customer service team.
Payment:
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos:
Why Buy From Apex Waves:
