Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
NI-9481E Request for Availability
NI-9481E, 4 Channel, SPST Relay, 50 mΩ, Board Only C Series Relay Output Module
Rated 4.6/5 | 8 ratings
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Ground Shipping
✔ NIST Calibration Available
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Carol Zimme**** Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
National Instruments NI-9481E C Series Relay Output Module
Equipped with four channels, the NI-9481E (part number: 780538-01) is the board only version of the NI-9481 Electromechanical Relay Output Module from National Instruments. Designed with a single-pole, single-throw (SPST) relay, the NI-9481E is compatible with any NI cDAQ or cRIO chassis. Each channel of this versatile module is built with an electromechanical relay that allows for signal switching to a maximum of 30 VDC (2 A), 60 VDC (1 A), or 250 VAC (2 A). The NI-9481E enables the user to connect directly with a range of industrial instruments, including DC instruments, actuators, and motors.
Designed for connectivity, the NI-9481E features a detachable 10 screw-terminal connector. Each relay channel of the module has two interchangeable terminals, CHa and CHb. In order to attach a load to the NI-9481E, the positive lead should be connected to either of these terminals, while the ground should be attached to one of the leads of the power supply. The remaining CHa or CHb terminal should be connected to the other lead of the power supply. In addition, each channel is equipped with an LED indicator that provides insight into the status of the channel at a glance. When the LED is lit, the channel is active- and one the LED is dark, it indicates that the channel is off. When the chassis is in sleep mode, the LEDs of the NI-9481E’s channels are nonoperational.
The chassis of the NI-9481E draws in a maximum power consumption of 580 mW when in active mode and a maximum consumption of 5 mW when in sleep mode. The screw-terminal wiring of the module uses copper conductor wire and measures 12 to 24 AWG with 10 mm (0.39 in.) of insulation stripped from the end. The torque for the screw terminals of the relay output module measures 0.5 to 0.6 N · m (4.4 to 5.3 lb · in.).
Intended for indoor use only, the NI-9481E has an operating temperature range of –40 to 70 °C and a storage temperature range of -40 to 85 °C. The module weighs in at 150 g (5.3 oz).
| Model Name | NI-9481E |
|---|---|
| Part Number | 780538-01 |
| Part Type | SPST Electromechanical Relay Module |
| Part Series | C Series |
| Power Consumption | 580 mW max (Active), 5 mW max (Sleep) |
| Screw Terminal Wiring | 12 to 24 AWG, Copper |
| Operating Temp Range | 40 to 70 °C |
| Storage Temp Range | –40 to 85 °C |
| Weight | 150 g (5.3 oz) |
| Warranty | Three Year Warranty |
| Manufacturer | National Instruments |
Associated part numbers for NI-9481E:
National Instruments NI-9481E Frequently Asked Questions
What is the difference between the NI-9481E and the NI-9481?
The NI-9481E is the board only version of the NI-9481 Electromechanical Relay Output Module from National Instruments.
What devices is the NI-9481E compatible with?
The NI-9481E is compatible with any NI cDAQ or cRIO chassis.
How many channels does the NI-9481E have?
The NI-9481E has four channels.
NI-9481E PDF Manuals
ARCHIVEDNI-9481EOPERATINGINSTRUCTIONSANDSPECIFICATIONS_AUGUST2005.PDF
Delivery:
No hassle return policy.
Dedicated customer service team.
Payment:
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos:
Why Buy From Apex Waves:
