Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
NI-9757 Request for Availability
NI-9757, 2-Channel, C Series Oxygen Sensor Interface Module
Rated 4.8/5 | 10 ratings
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Ground Shipping
✔ NIST Calibration Available
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Carol Zimme**** Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
National Instruments NI-9757 C Series Oxygen Sensor Interface Module
The NI‑9757 (Part number: 782079-01) gives an interface to two Bosch LSU 4.2 or LSU 4.9 wideband exhaust oxygen sensors and four differential narrowband oxygen sensors. The NI‑9757 gadget driver permits client alignment of stoichiometry versus direct momentum for an assortment of fuel types (gas/diesel default). O2 estimations are accounted for as A/F, F/A, Lambda, and Phi. The NI‑9757 has functional, fuse‐protected warmer control circuits.
This model permits a predetermined measure of current for exchanging output channels or sourcing the output stack. If the NI 9757 goes into an overcurrent state by surpassing the predetermined greatest exchanging frequency or the output stack, the power supply starts to drop in voltage until it turns off or the overcurrent condition is evacuated. When the NI 9757 module is in this state, it can acknowledge new output state information. The outside DB-37 connector has terminals marked BATT (10) and GND (29). A common power control source is a car 12 V battery framework; however, the NI 9757 can acknowledge control from a scope of 6 V to 32 V. The LSU 4.x wide-band sensors will only work when the power supply is in the scope of 8 V to 16.5 V. The module is switch battery ensured to - 18 V.
Without sensors associated and empowered, the NI 9757 requires 100 mA maximum from the outside supply. The outer power source must be fit for driving the sensor radiators, which may need 12 A if all diverts are being used.
| Model | NI-9757 |
|---|---|
| Manufacturer | National Instruments |
| Part Number | 782079-01 |
| Type | C Series Oxygen Sensor Interface Module |
| Narrow-band Sensor Input Channels | 4 |
| Bosch Channels | 2 |
| Channel Reading Update Rate | 1 kHz |
| A/D Resolution | 12 bits |
| Weight | 170 g. |
| Warranty | 2-3 Year Warranty |
| NI-9757 Manual | User Manual and Maintenance Manual Available for Download |
| Price | Contact a sales representative for a quote. |
Associated part numbers for NI-9757:
National Instruments NI-9757 Frequently Asked Questions
Question: What is the external power input range for the NI 9757 module?
Answer: The external power input range for the NI 9757 module is 6 to 32 V.
Question: What is the resolution of the NI-9757?
Answer: The resolution of the NI-9757 is 12-bit.
Question: Which accessories are required for the NI 9757?
Answer: The NI 9757 requires the NI 9923 Terminal Block, a Power Supply with 12VDC 15 A 100-240VAC/110-150VDC Input, and a NI O2 Sensor Kit with Sensor, Cable, Bung, and Plug.
Question: What is the internal analog-to-digital conversion rate of the NI-9757?
Answer: The internal analog-to-digital conversion rate of the NI-9757 is 1000 samples/s.
Delivery:
No hassle return policy.
Dedicated customer service team.
Payment:
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos:
Why Buy From Apex Waves:
