Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
NI-9775 Request for Availability
NI-9775, 20 mS/s, 4 Channel, 14 Bit, C Series Digitizer Module
Rated 4.5/5 | 10 ratings
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Ground Shipping
✔ NIST Calibration Available
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Carol Zimme**** Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
National Instruments NI-9775 C Series Digitizer Module
The NI-9775 (Part Number: 784539-01) furnishes referenced single-finished simple contributions with deceitful modes in applications, such as error location in electrical transmission lines or auxiliary failure events. This module has a built-in simple reference trigger to help with rapid wonders and for included adaptability can perform waveform gushing at a lower test rodent. The NI 9775, a 4-channel Digitizer Module, can gauge transient phenomenon like faults in electrical transmission lines from lightning strikes or basic failure events at 20 MS/s per channel. It has a resolution of 14 bits.
The module's store and forward design permits up to 128 Mbits of estimation information to be sent back to the controller and dissected. The NI device is run using the NIDAQmx driver software which is compatible with software packages/application development environments (ADEs) such as LabVIEW, LabWindows/CVI, or Visual Basic .NET. This module can also utilize CompactRIO and a LabVIEW FPGA to build up a propelled trigger for low speed spilling information for included adaptability.
The NI 9775 comes with two timing modes: fast and high-resolution. Fast mode turns off the computerized annihilation channel on all channels and empowers users to set the simple channel per channel. On the other hand, high-resolution mode turns on both the analog filter and advanced decimation filter for all channels.
This module comes with three acquisition modes: continuous mode, record mode, and advanced mode. In continuous mode, the NI 9775 exchanges constant information to the frame at a total rate of 4 MS/s over all channels. In record mode, the NI-9775 stores tests into locally available memory at up to 20 MS/s, then exchanges the information to the chassis at a slower rate. In advanced mode, the NI-9775 joins the usefulness of nonstop mode and record mode to empower more perplexing activating plans for continuous information.
The NI device weighs 172 g. It has a recommended operating temperature range of -40 °C to 70 °C, a storage temperature range of -40 °C to 85 °C, and random and sinusoidal operating vibrations of 5 grms and 5 g respectively–all at a frequency range of 10 to 500 Hz.
| Model | NI-9775 |
|---|---|
| Manufacturer | National Instruments |
| Part Number | 784539-01 |
| Type | C Series Digitizer Module |
| Channels | 4 |
| Resolution | 14 bits |
| Onboard Memory | 128 Mbits |
| Sample Rate | 20 MS/s per channel |
| Weight | 172 g. |
| Warranty | Three Year Warranty |
| NI-9775 Manual | User Manual and Maintenance Manual Available for Download |
| Price | Contact a sales representative for a quote. |
Associated part numbers for NI-9775:
National Instruments NI-9775 Frequently Asked Questions
Question: Which accessories are required for the NI 9775?
Answer: The NI 9775 requires a 50 Ohm, 1 m, BNC Male to BNC Male Cable (Part Number: 781887-01). This module can also be used with several noise/EMI suppression ferrites, but they are not required.
Question: Which driver is necessary to calibrate the NI-9775?
Answer: The NI-DAQmx 17.6 or later driver is necessary to calibrate the NI-9775.
Question: Does the NI 9775 have an advanced acquisition mode?
Answer: Yes, but the advanced acquisition mode is only available when the NI 9775 is used on CompactRIO systems.
Question: What is the overvoltage protection value for the input channels on the NI-9775?
Answer: The overvoltage protection value for the input channels on the NI-9775 is ±30 V DC, safe operating area.
Delivery:
No hassle return policy.
Dedicated customer service team.
Payment:
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos:
Why Buy From Apex Waves:
