Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
sbRIO-9853 Request for Availability
sbRIO-9853, 2-Port, High-Speed, C Series CAN Interface Module
Rated 4.6/5 | 10 ratings
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Ground Shipping
✔ NIST Calibration Available
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Carol Zimme**** Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
National Instruments sbRIO-9853 C Series CAN Interface Module
The sbRIO-9853 is a high-speed C Series Controller Area Network (CAN) Interface Module. The manufacturer of the NI sbRIO-9853 module is National Instruments. This module is available with the part number 780923-01. The sbRIO-9853 CAN Interface Module is designed to develop applications based on an FPGA for CompactRIO systems, using the NI-RIO driver. The NI sbRIO-9853 module is the most appropriate choice in specific applications that are programmed through NI LABVIEW FPGA modules. These applications not only involve low-level triggering and control features, but also byte-level operation and manipulation of CAN frames.
The National Instruments sbRIO-9853 CAN Interface Module is a non-enclosed module designed for OEM applications. The sbRIO-9853 module features 2 fully isolated high-speed CAN ports. Each port is CAN 2.0B compatible and equipped with the NXP SJA1000 CAN controller, which can support 11-bit and 29-bit identifiers. Additionally, each CAN port features an NXP TJA1041 High-Speed CAN transceiver with up to 1 Mbps baud rate capability. For the connection with CAN buses, the NI sbRIO-9853 module is provided with two 9-pin D-SUB male connectors. The sbRIO-9853 C Series CAN Interface Module has a capacity of connectivity with minimum 30 nodes if all nodes comply with the standard requirements of ISO 11898.
The NI sbRIO-9853 CAN Interface Module has fine performance in rapid-control prototyping, automation control, and bus monitoring applications. The sbRIO-9853 module is designed with built-in safety features, which can support -27 to +40 VDC between port and COM. For isolation overvoltage, the NI sbRIO-9853 can withstand 500Vrms for both port-port and port-earth ground. While in active operation mode, the sbRIO-9853 requires 625 mW power while transmitting and 400 mW while receiving.
| Model | sbRIO-9853 |
|---|---|
| Manufacturer | National Instruments |
| Part Number | 780923-01 |
| Series | C Series |
| Type | CAN Interface Module |
| CAN Ports | 2 |
| CAN Physical Layer | High-speed |
| I/O Connectors | Two 9-pin male D-Sub connectors |
| Transceiver | NXP TJA1041 |
| Weight | 1.48 oz. |
| Warranty | 2-3 Year Warranty |
| sbRIO-9853 Manual | User Manual and Maintenance Manual Available for Download |
| Price | Contact a sales representative for a quote. |
Associated part numbers for sbRIO-9853:
sbRIO-9853 PDF Manuals
Delivery:
No hassle return policy.
Dedicated customer service team.
Payment:
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos:
Why Buy From Apex Waves:
