Modular Systems > National Instruments > CompactDAQ

USB-9162 Request for Availability

Q: What modules are compatible with the NI USB-9162?

The cDAQ Chassis is compatible with the modules that function with the USB single module carrier in C Series chassis, including NI CompactDAQ, CompactRIO, or R Series expansion chassis.

Q: Which driver should be used with the USB-9162?

The NI driver best suited for use with the CompactDAQ Chassis is NI-DAQmx.

Q: What type of connector does the device have?

The USB-9162 features a 15-Pin D-SUB connector type.

USB-9162, 1-Slot, 15-Pin D-SUB Connector, CompactDAQ Chassis for C Series Modules

Rated 4.8/5 | 20 ratings

NI USB-9162 CompactDAQ Chassis | In Stock Ships Today! | Image

❮ ❯

Actual item may vary if no part number is provided on quote request.

✔ 2 Year Warranty Included

✔ Free Ground Shipping

✔ NIST Calibration Available

Anonymous Verified Buyer

" Very responsive and helpful, competitive pricing. Good source! "

July 2025

Andrew Gar**** Verified Buyer

" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "

March 2025

Said Sai**** Verified Buyer

" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "

January 2025

Bob C**** Verified Buyer

" Jason was able to get our emergency situation taken care of quickly and professionally. "

May 2025

Gregg Flecki**** Verified Buyer

" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "

January 2025

Please fill out the form below to send in your quote request and a representative will contact you with a formal quote. View blog post on Model Name vs. Part Numbers

Name*

Email Address*

Model Name

Part Number

Qty

+Add more parts

Additional Info - Calibration, Expedited Shipping or Other Notes

Avg. Response Time: 15 min

Prefer to send a text message?

Text your name, e-mail, and parts to quote to: 1-919-809-5227

Carol Zimme**** Verified Buyer

" Very responsive and helpful, competitive pricing. Good source! "

July 2025

Andrew Gar**** Verified Buyer

" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "

March 2025

Said Sai**** Verified Buyer

" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "

January 2025

Bob C**** Verified Buyer

" Jason was able to get our emergency situation taken care of quickly and professionally. "

May 2025

Gregg Flecki**** Verified Buyer

" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "

January 2025

National Instruments USB-9162 CompactDAQ Chassis

The National Instruments NI USB-9162 (Part Number: 779471-01) is a Single-Module Carrier CompactDAQ Chassis. The USB-9162 is considered an easily portable and cost-effective model for NI C Series modules. This one-slot carrier can be utilized to prototype sensor connections before the user integrates modules into a National Instruments CompactRIO system. The NI USB-9162 Carrier can also be deployed as a debugging instrument for large systems. In addition, the USB-9162 can be used for prototyping sensor links before the modules are introduced into an NI CompactRIO system.

This Chassis supports USB 2.0 Hi-Speed bus interface and consumes 500 mA maximum current from USB while operating and 2.5 mA maximum in suspend mode. The NI USB 9162 offers 250 VAC continuous channel-to-channel isolation and 1500 VAC channel-to-channel withstand isolation. This NI CompacDAQ Chassis is a Measurement Category II instruments, which is for measurements completed on circuits directly linked to the electrical distribution system.

The USB-9162 National Instruments comes with threaded inserts, so it can be mounted to a panel or wall. The USB 9162 features a green LED near the USB connector. The rate of this LEDs blinking indicates different device states. A single blink shows that the device is online and receiving power whereas a double-blink confirms that there is no error and the device is operating normally. This CompactDAQ Chassis does not require additional software installation since it is fully compatible with the NI-DAQmx for Windows and NI-DAQmx Base for Mac OS and Linux. The user can have their NI USB-9162 up and running by inserting the Chassis’ cable into any USB 2.0 port available on a PC or Mac if the required program is already installed. The NI device weighs 3.5 oz, and measures 4.51 x 3.37 x 0.99 in. in physical dimensions. It has a recommended operating temperature range of 0 to 60 °C, a storage temperature range of -40 to 85 °C, and a non-condensing operating and storage humidity range of 10 to 90% RH and 5 to 95% RH respectively.

The USB-9162 has been announced as Obsolete by National Instruments, but the CompactDAQ Chassis will still be available for purchase and repairs by Apex Waves in perpetuity.

Model	USB-9162
Manufacturer	National Instruments
Part Number	779471-01
Type	CompactDAQ Chassis
Bus Interface	USB 2.0 Hi-Speed
Current Consumption from USB	500 mA, Maximum
Compatible Models	NI C Series Modules
Suspend Mode	2.5 mA Maximum
Operating Temperature	0 to 60 °C
Storage Temperature	-40 to 85 °C
Dimensions	4.51 in. × 3.37 in. × 0.99 in. (114.6 mm × 85.7 mm × 25.1 mm)
Weight	3.5 oz. (101 g)
Warranty	Three Year Warranty
USB-9162 Manual	User Manual and Maintenance Manual Available for Download
Price	Request a Quote for Pricing

Associated part numbers for USB-9162:

National Instruments USB-9162 Frequently Asked Questions

Question: What modules are compatible with the NI USB-9162?

Answer: The cDAQ Chassis is compatible with the modules that function with the USB single module carrier in C Series chassis, including NI CompactDAQ, CompactRIO, or R Series expansion chassis.

Question: What is the channel-to-earth ground isolation for the NI USB-9162?

Answer: The channel-to-earth ground isolation is 250 VAC, Measurement Category II continuous and 3000 VAC withstand.

Question: Which driver should be used with the USB-9162?

Answer: The NI driver best suited for use with the CompactDAQ Chassis is NI-DAQmx.

Question: What type of connector does the device have?

Answer: The USB-9162 features a 15-Pin D-SUB connector type.