Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
cDAQ-9189 Request for Availability
cDAQ-9189, 8-Slot, Synchronization Enabled, CompactDAQ Chassis
Rated 4/5 | 7 ratings
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Ground Shipping
✔ NIST Calibration Available
Expert Insights for the cDAQ-9189
"The cDAQ-9189 is a TSN enabled CompactDAQ ethernet chassis. With 2 ethernet ports, it is a great solution for remote distributed sensor measurement systems. It supports a variety of C series modules that can manage analog, digital, and timing I/O operations. This chassis provides the perfect solution for long range measurements that need to be timed correctly, while also maintaining connectivity."
- Chris B.
LabVIEW Trained
In-House Technician
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Carol Zimme**** Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Expert Insights for the cDAQ-9189
"The cDAQ-9189 is a TSN enabled CompactDAQ ethernet chassis. With 2 ethernet ports, it is a great solution for remote distributed sensor measurement systems. It supports a variety of C series modules that can manage analog, digital, and timing I/O operations. This chassis provides the perfect solution for long range measurements that need to be timed correctly, while also maintaining connectivity."
- Chris B.
LabVIEW Trained
In-House Technician
National Instruments cDAQ-9189 CompactDAQ Chassis
The National Instruments cDAQ-9189 (Part Numbers: 785065-01, 785065-02, 787930-01) is an 8-slot CompactDAQ Ethernet chassis designed for distributed sensor measurement applications. This chassis enables synchronized measurements across multiple channels, making it ideal for high-performance data acquisition. With support for parallel operation of advanced output modules, it allows users to run multiple software-timed tasks while maintaining synchronization. The cDAQ-9189 also features a programmable debouncing filter on each Programmable Function Interface (PFI) signal, ensuring accurate signal processing by sampling inputs through a user-configured Filter Clock from the chassis time base. The 785065-02 variant includes conformal coating for enhanced environmental protection.
For precise edge counting applications, the cDAQ-9189 employs a high-resolution counter that can be configured to count rising or falling edges on the Source input. Users can control the counting direction and retrieve counter values on demand or through a sample clock. Buffered edge counting enables the device to store sampled values in FIFO memory, facilitating high-speed data transfers via the STC3 system. Additionally, the chassis supports single-pulse width measurement by counting edges on the Source input while the Gate input remains active, then storing the count in FIFO upon deactivation of the Gate signal. The voltage input range of the chassis is measured at the power connector, ranging from 9 V to 30 V. The maximum power consumption of the device is 16 W.
The cDAQ-9189 is fully compatible with NI-DAQmx driver software, allowing seamless integration with application development environments such as LabVIEW Real-Time Module. This compact and lightweight device, when unloaded, weighs 37.6 oz (1065.9 g) and measures 10.74 x 3.47 x 2.45 inches (272.8 mm × 88.1 mm × 62.3 mm). This makes it incredibly easy to deploy in various test environments.
Built for durability in a range of applications, the cDAQ Chassis operates within a temperature range of -40°C to 70°C with a storage temperature range of -40°C to 85°C. The humidity tolerance of the device ranges from 10% to 90% RH for operating conditions and 5% to 95% RH for nonoperational / storage conditions. These environmental specifications meet the requirements of the IEC 60068-2-1, IEC 60068-2-2, and IEC 60068-2-56 standards.
| Model | cDAQ-9189 |
|---|---|
| Manufacturer | National Instruments |
| Part Numbers | 785065-01, 785065-02, 787930-01 |
| Type | CompactDAQ Chassis |
| Slots | 8 |
| Bus Connector | Ethernet |
| Timing Accuracy | 50 ppm of Sample Rate |
| Onboard Trigger? | Yes |
| Synchronization Enabled? | Yes |
| Counter/Timers | 4 |
| Operating Temp Range | -40 °C to 70 °C |
| Storage Temp Range | -40 °C to 85 °C |
| Dimensions | 10.74 x 3.47 x 2.45 in. |
| Weight | 37.6 oz. |
| Warranty | Three Year Warranty |
| cDAQ-9189 Manual | User Manual and Maintenance Manual Available for Download |
| Price | Request a Quote for Pricing Information |
Associated part numbers for cDAQ-9189:
National Instruments cDAQ-9189 Frequently Asked Questions
Question: Why are there two part numbers for the NI cDAQ-9189?
Answer: The cDAQ Chassis has two versions: one that is conformal coated (Part Number: 785065-02) and one that is not conformal coated (Part Number: 785065-01).
Question: How does the NI cDAQ-9189 provide timing over the network?
Answer: The CompactDAQ Chassis provides synchronized timing over the network using TSN, which is ideal for highly distributed measurements that go over a long distance.
Question: Can you combine I/O modules when using the cDAQ-9189?
Answer: The chassis allows you to combine C Series I/O modules to create a mix of analog I/O, digital I/O, and counter/timer measurements.
Question: How many counters/timers does the device have available?
Answer: The NI cDAQ-9189 has four 32-bit general-purpose counters/timers.
Question: What is the difference between the cDAQ-9189 and the cRIO-9148?
Answer: The cDAQ-9189 has a TSN (Time-sensitive network) feature, as well as DAQmx capability- while the cRIO-9148 uses FPGA.
cDAQ-9189 PDF Manuals
CDAQ-9185-9189-FIRMWARE-FOSS-NOTICES-LOCATIONS-NOTE-TO-USERS.PDF
CDAQ-9185-9189-QUICK-START.PDF
CDAQ-9185-9189-USER-MANUAL.PDF
CDAQ-9185-9189-AND-FIELDDAQ-FOSS-RELEASE-NOTES-28VERSION-18.629.PDF
CDAQ-9185-9189-AND-FIELDDAQ-FOSS-RELEASE-NOTES-28VERSION-19.129.PDF
CDAQ-9185-9189-AND-FIELDDAQ-FOSS-RELEASE-NOTES-28VERSION-19.529.PDF
CDAQ-9189-SAFETY-ENVIRONMENTAL-AND-REGULATORY-INFORMATION.PDF
Driver Downloads for cDAQ-9189
OS Compatibility: …
Delivery:
No hassle return policy.
Dedicated customer service team.
Payment:
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos:
Why Buy From Apex Waves:
