Modular Systems > National Instruments > CompactRIO Controllers

cRIO-FRC In Stock | Ships in 3-5 Days

Q: Can the cRIO FRC chassis be used as a remote data collection system?

Yes, you can use the cRIO FRC chassis to collect data as long as you have all the software licensed for this, which would include LabVIEW and Real-Time.

Q: Where can I find an FRC 2014 update suite for the NI cRIO-FRC?

To get the updated FRC 2014 for the NI cRIO-FRC, you need the NI Software for FRC 2014 installer and the FRC 2014 Update Suite.

Q: What do you need to install the NI cRIO FRC?

To install the NI cRIO FRC, you will need the FIRST Robotics Competition Kit and C Series I/O modules.

cRIO-FRC, 128 MB nonvolatile memory, 64 MB system memory, CompactRIO Chassis

Rated 4.52/5 | 20 ratings

cRIO-FRC National Instruments CompactRIO Chassis | Apex Waves | Image

❮ ❯

Actual item may vary if no part number is provided on quote request.

✔ 2 Year Warranty Included

✔ Free Ground Shipping

✔ NIST Calibration Available

Anonymous Verified Buyer

" Very responsive and helpful, competitive pricing. Good source! "

July 2025

Andrew Gar**** Verified Buyer

" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "

March 2025

Said Sai**** Verified Buyer

" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "

January 2025

Bob C**** Verified Buyer

" Jason was able to get our emergency situation taken care of quickly and professionally. "

May 2025

Gregg Flecki**** Verified Buyer

" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "

January 2025

Please fill out the form below to send in your quote request and a representative will contact you with a formal quote. View blog post on Model Name vs. Part Numbers

Name*

Email Address*

Model Name

Part Number

Qty

+Add more parts

Additional Info - Calibration, Expedited Shipping or Other Notes

Avg. Response Time: 15 min

Prefer to send a text message?

Text your name, e-mail, and parts to quote to: 1-919-809-5227

Carol Zimme**** Verified Buyer

" Very responsive and helpful, competitive pricing. Good source! "

July 2025

Andrew Gar**** Verified Buyer

" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "

March 2025

Said Sai**** Verified Buyer

" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "

January 2025

Bob C**** Verified Buyer

" Jason was able to get our emergency situation taken care of quickly and professionally. "

May 2025

Gregg Flecki**** Verified Buyer

" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "

January 2025

National Instruments cRIO-FRC CompactRIO Chassis

The cRIO-FRC uses a basic Category 5 (CAT-5) or a superior protected, bent match Ethernet link to interface the body to an Ethernet center point or an Ethernet hybrid link to associate the undercarriage straightforwardly to a PC. The host PC associates to the frame near a basic Ethernet association. If the host PC is on a system, the user should arrange the chassis on an indistinguishable subnet from the host PC. If neither the host PC nor the case is associated with a system, the user can interface the two straightforwardly utilizing a hybrid link. This model requires an outside power supply. The cRIO FRC channels and controls the provided control and gives capacity to the greater part of the I/O modules. The instrument has one layer of switch voltage insurance. Finish the accompanying strides to interface a power supply to the suspension. When the user applies capacity to the cRIO-FRC, the controller plays a power-on individual test (POST). Amid the POST, the Power and Status LEDs turn on. The Status LED disappears, showing that the POST is finished. On the off chance that the LEDs do not carry on along these lines when the framework controls on, then the user can arrange the cRIO FRC to dispatch an implanted remain solitary LabVIEW RT application each time they boot the controller.

This instrument comes with a port that can be associated to gadgets, such as show or info gadgets. Serial Vis can be used to peruse from and keep in touch with the serial port from the application.

Model	cRIO-FRC
Manufacturer	National Instruments
Type	CompactRIO Chassis
Logic Cells	46,080
Embedded Block RAM	720 kbits
FPGA	Spartan-3 2000
Network Interface	10BaseT and 100BaseTX Ethernet
Compatibility	IEEE 802.3
Weight	32.7 oz.
Warranty	2-3 Year Warranty
cRIO-FRC Manual	User Manual and Maintenance Manual Available for Download
Price	Contact a sales representative for a quote.

Associated part numbers for cRIO-FRC:

National Instruments cRIO-FRC Frequently Asked Questions

Question: Can the cRIO FRC chassis be used as a remote data collection system?

Answer: Yes, you can use the cRIO FRC chassis to collect data as long as you have all the software licensed for this, which would include LabVIEW and Real-Time.

Question: Where can I find an FRC 2014 update suite for the NI cRIO-FRC?

Answer: To get the updated FRC 2014 for the NI cRIO-FRC, you need the NI Software for FRC 2014 installer and the FRC 2014 Update Suite.

Question: What do you need to install the NI cRIO FRC?

Answer: To install the NI cRIO FRC, you will need the FIRST Robotics Competition Kit and C Series I/O modules.