Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
DCM-2316 In Stock | Ships in 3-5 Days
DCM-2316, 16-Channel, Direct Injector Control and Measurement Device
Rated 4.6/5 | 18 ratings
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Ground Shipping
✔ NIST Calibration Available
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Carol Zimme**** Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
National Instruments DCM-2316 Direct Injector Control and Measurement Device
The DCM-2316 is a multi-channel Direct Injector Control and Measurement Device developed by National Instruments. The DCM-2316 has the part number 784570-01. The NI DCM-2316 device possesses 16 channels, as well as engine position tracking in high-resolution and advanced triggering features for injector control. The DCM-2316 device is manufactured with accommodation for up to 8 piezoelectric or 16 solenoid direct injectors.
The NI DCM-2316 device normally operates at voltages up to 250 V. The user must take extreme care to protect the DCM-2316 against shock. The NI DCM-2316 Direct Injector Control and Measurement Device needs two minutes to dissipate high voltages after being completely powered off. The user must be informed about the safety protocols of the DCM-2316 device. It is prohibited to touch any of the connector pins or injector terminals while the NI DCM-2316 is powered ON. The user can control a complete fuel system with the National Instruments DCM-2316 device.
The National Instruments DCM-2316 Direct Injector Control and Measurement Device has advanced waveform generation and triggering features. The user can outline complicated current/voltage profiles with the NI DCM-2316. The 16 channels on this device can be used for accurate control of the fuel systems, along with delivering nanosecond-scale control with the LabVIEW reconfigurable I/O (RIO) architecture. The maximum power consumption for the DCM-2316 device is based on a system running a high-stress application. It is recommended not to connect the NI DCM-2316 to signals or use it for measurements in Measurement Categories II, III, or IV.
| Model | DCM-2316 |
|---|---|
| Manufacturer | National Instruments |
| Part Number | 784570-01 |
| Type | Direct Injector Control and Measurement Device |
| Channels | 16 |
| FPGA | Xilinx Zynq-7000, XC7Z020 All Programmable SoC |
| Logic Cells | 85,000 |
| Flip-flops | 106,400 |
| Operating System | NI Linux Real-Time (32-bit) |
| Dimensions | 19 in X 8.7 in X 4.4 in. |
| Weight | 16.60 lbs. |
| Warranty | 2-3 Year Warranty |
| DCM-2316 Manual | User Manual and Maintenance Manual Available for Download |
| Price | Contact a sales representative for a quote. |
Associated part numbers for DCM-2316:
DCM-2316 PDF Manuals
Delivery:
No hassle return policy.
Dedicated customer service team.
Payment:
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos:
Why Buy From Apex Waves:
