Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
PXI-1408 In Stock | Ships in 3-5 Days
PXI-1408, 4 Video Input, IMAQ Device
Rated 4.5/5 | 11 ratings
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Ground Shipping
✔ NIST Calibration Available
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Carol Zimme**** Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
National Instruments PXI-1408 IMAQ Device
The National Instruments PXI-1408 IMAQ Device has two distinctive input sources by means of a BNC connector or a 25-stick DSUB port and two diverse information modes—referenced single-ended (RSE) and differential (DIFF) input. When the user utilizes the BNC input for VIDEO0, set the input mode to RSE (W1 populated). When using the 25-pin DSUB port for VIDEO0, set the input mode for either RSE or DIFF.
While in RSE mode, this model’s video input utilizes one analog input line, which interfaces with the video multiplexer hardware. The negative input to the video multiplexer is tied inside to analog ground. When the NI PXI-1408 is in DIFF mode, the video input utilizes two analog input signals. One signal associates with the positive input of the video multiplexer hardware while the other input signal interfaces with the negative input of the video multiplexer hardware.
The PXI-1408 device has an 8-bit flash ADC that changes over the video signals to digital formats, four video signal multiplexers, and programmable gain and displacement. It additionally utilizes a PXI interface for rapid input exchange, DMA dispersion controls that control information exchange between the input and output memory (FIFO) buffers and the PCI bus, non-volatile and Static RAM to set up registers during power-up and program the DMA controllers, and acquisition and control circuits for regions of interest that supervise the video signals. The plate likewise incorporates an effective trigger that incorporates four outer triggers and RTSI bus triggers. Other highlights incorporate inside created or remotely CSYNC, HSYNC, VSYNC, and PCLK synchronization and clock signals.
| Model | PXI-1408 |
|---|---|
| Manufacturer | National Instruments |
| Series | Frame Grabbers |
| Type | IMAQ Device |
| Video Inputs | 4 monochrome |
| Video Input Impedance | 75 Ohms |
| Formats Supported | RS-170/NTSC, CCIR/PAL, variable scan |
| Dimensions | 3.9 x 6.3 in. |
| Weight | 0.38 lb. |
| Warranty | 2-3 Year Warranty |
| PXI-1408 Manual | User Manual and Maintenance Manual Available for Download |
| Price | Contact a sales representative for a quote. |
Associated part numbers for PXI-1408:
National Instruments PXI-1408 Frequently Asked Questions
Question: What is the pixel jitter rate for the PXI-1408?
Answer: The pixel jitter is <5 ns peak for the PXI-1408.
Question: What is the sampling rate for the NI PXI-1408?
Answer: The NI PXI-1408 has a sampling rate of 5 to 20 MHz, externally clocked.
Question: Which devices are compatible with the PXI-1408 IMAQ Device?
Answer: PCI, PXI, and CompactPCI Chassis that support PAL, CCIR, RS-170, and NTSC video standards are compatible with the PXI-1408 IMAQ Device.
Question: Where can I find the PXI-1408 user manual?
Answer: The user manual for the PXI-1408 can be downloaded from apexwaves.com.
PXI-1408 PDF Manuals
PXI-1408-LETTER-OF-VOLATILITY.PDF
ARCHIVED--DISCONTINUATION-OF-THE-IMAQ-PXI-1408-NOTE-TO-USERS.PDF
ARCHIVED--GETTING-STARTED-WITH-YOUR-IMAQ-PCI-PXI-1408-AND-THE-NI-IMAQ-SOFTWARE-FOR-WINDOWS-95-NT.PDF
ARCHIVED--IMAQ-PCI-PXI-1408-USER-MANUAL.PDF
ARCHIVED--SETUP-AND-TEST-THE-PCI-PXI-1408.PDF
Delivery:
No hassle return policy.
Dedicated customer service team.
Payment:
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos:
Why Buy From Apex Waves:
