Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
777720-01 Request for Availability
777720-01, 50-Pin, NI DAQ, SH-50-50 Shielded Cable
Rated 4.6/5 | 19 ratings
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Ground Shipping
✔ NIST Calibration Available
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Carol Zimme**** Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
National Instruments 777720-01 Shielded Cable
Part Number 777720-01 is the identifying part number for the National Instruments SH-50-50 Shielded Cable. This cable is mainly used to connect a NI DAQ or Motion Control device to different accessories and terminal blocks. It is a part of NI’s digital signal conditioning and I/O connectivity product series and is used in special applications where signal deterioration is not allowed. The cable comes in a length of 1 m or 2 m.
The 777720-01 features a 50-pin female connector with a spade terminal grounding strap on one end and a 50-pin female connector with a ring terminal grounding strap on the other end The connectors are wired pin-to-pin with a 25 twisted pair cable. To set up and use the 777720-01, you would need the following: the installation guide, a compatible NI device, a number 1 Philips-head screwdriver, 3 in. 50-to-50-pin ribbon cable (comes inside the kit), and replacement brackets with spade terminals (NB and AT), that are also included in the kit.
To install the 777720-01, first, you must replace the bracket on the board with the bracket from the SH-50-50 kit. Note that, you must first turn off the computer, remove the board from the computer, and then remove the screws that attach the bracket to the board. One important thing to consider is that the 50-pin connector on your board might have small plastic key inserts for use with military-polarized connectors. Since this is incompatible with the SH50-50 cable, it should be removed. You can gently press a pencil or a pen tip on the release tab in the center of the key insert. After this, you should connect the SH50-50 cable to a 50-pin board.
To install the 777720-01 on a 50-pin board, you must first install the board in a slot on your computer. This is followed by connecting the 50-pin connector of the shielded cable to the board I/O connector. Then, you must connect the 50-pin connector with the ring terminal grounding strap to your accessory. You can use an extender for the 3-inch ribbon cable for better flexibility.
| Part Number | 777720-01 |
|---|---|
| Model Name | SH50-50 |
| Part Type | Shielded Cable |
| Cable Length | 1 m or 2 m |
| Connector Type | 50-pin |
| Works With | NI DAQ or Motion Control Devices |
| Part of | NI’s Digital Signal Conditioning and I/O Connectivity Product Series |
| Internal Wiring | Pin-to-pin with a 25 twisted pair cable |
| Compatible Devices | PCI-6503 or PC-DIO-24 |
| Warranty | 2-3 years |
Associated part numbers for 777720-01:
Delivery:
No hassle return policy.
Dedicated customer service team.
Payment:
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos:
Why Buy From Apex Waves:
