Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
AL-3011 Request for Availability
AL-3011, 60 V, 100 mA, 787890-01 Resistor Emulation Board
Rated 4.5/5 | 18 ratings
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Ground Shipping
✔ NIST Calibration Available
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Carol Zimme**** Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
National Instruments AL-3011 Resistor Emulation Board
The resistor emulation board AL-3011 (Part Number: 787890-01) was designed specifically for use with the National Instruments (NI) Switch Load Signal Conditioning (SLSC) system. This module is ideal for hardware-in-the-loop (HIL) simulators since it simulates resistive sensors with various functionality. There are numerous applications for its 16 channels, each of which supports a resistance range of 10 Ω to 8 MΩ.
By offering a short to either FI+ or FI-, the fault insertion (FIU) capabilities of each channel of the AL-3011 enable the simulation of faults. With the use of this capability, which simulates real-world situations like damaged wiring or broken sensors, electronic control unit (ECU) hardware and software can be validated and verified. Effective testing and development are made possible by the board's smooth integration into current systems, which is compatible with NI PXI and Compact-RIO instrumentation equipment.
Two common reference buses on the AL-3011 allow for flexible connection to various device under test (DUT) inputs. For fault insertion, the reference (REF) of each channel can either be connected to DUT_GND or disabled. To further increase the board's adaptability in a variety of testing scenarios, eight of the channels can be wired to DUT_PWR and the remaining eight channels can be linked to another DUT input.
For emulating sensors and actuators, such as temperature and pressure sensors, this resistor emulation board is quite helpful. It can support a wide range of simulation needs because to the incorporation of a large resistance range. Additionally, the AL-3011 has 16 separate, independent channels, which enable interference-free, exact and accurate emulation on all channels.
The AL-3011 is packaged with a LabVIEW driver and a Custom Device Driver for VeriStand for convenience of integration and use. This speeds up the setup procedure and guarantees compatibility with pre-existing NI software products. The board has sufficient capability for the majority of testing scenarios, with a maximum voltage of 60 V, a maximum current of 110 mA, and a power rating of 400 mW.
| Model Name | AL-3011 |
|---|---|
| Part Number(s) | 787890-01 |
| Part Type | Resistor Emulation Board |
| Channels | 16 independent and isolated channels |
| Resistance Range | 10 Ω to 8 MΩ |
| Fault Insertion (FIU) | Available on each channel |
| Max Voltage | 60 V |
| Max Current | 100 mA |
| Max Power | 400 mW per channel |
| Reference Configurations | Two common reference buses |
Associated part numbers for AL-3011:
Delivery:
No hassle return policy.
Dedicated customer service team.
Payment:
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos:
Why Buy From Apex Waves:
