Modular Systems > National Instruments > PXI Signal Insertion Modules

PXI-2514 Request for Availability

Q: What are the dimensions of the PXI-2514?

The PXI-2514 is 8.5 (L) x 1.6 (W) x 5.1 (H) in.

Q: What is the maximum switching power of the NI PXI-2514?

The maximum switching power of the NI PXI-2514 is 1,120 W for each channel.

Q: What is the operating temperature range for the PXI-2514?

The PXI-2514 has an operating temperature range of 0 to 50 degrees C.

Q: Which accessories are available for use with the PXI-2514?

The PXI-2514 has two accessories available: the DB8F-40A Cable (To 8-pin DSUB), 1 m (Part number: 781092-01) and the DB8F-40A Cable (To Bare Wire), 1 m (Part number: 781092-02).

PXI-2514, 7-Channel, PXI Signal Insertion Switch Module

Rated 4.78/5 | 16 ratings

PXI-2514 National Instruments Signal Insertion Switch Module | Apex Waves | Image

❮ ❯

Actual item may vary if no part number is provided on quote request.

✔ 2 Year Warranty Included

✔ Free Ground Shipping

✔ NIST Calibration Available

Anonymous Verified Buyer

" Very responsive and helpful, competitive pricing. Good source! "

July 2025

Andrew Gar**** Verified Buyer

" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "

March 2025

Said Sai**** Verified Buyer

" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "

January 2025

Bob C**** Verified Buyer

" Jason was able to get our emergency situation taken care of quickly and professionally. "

May 2025

Gregg Flecki**** Verified Buyer

" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "

January 2025

Please fill out the form below to send in your quote request and a representative will contact you with a formal quote. View blog post on Model Name vs. Part Numbers

Name*

Email Address*

Model Name

Part Number

Qty

+Add more parts

Additional Info - Calibration, Expedited Shipping or Other Notes

Avg. Response Time: 15 min

Prefer to send a text message?

Text your name, e-mail, and parts to quote to: 1-919-809-5227

Carol Zimme**** Verified Buyer

" Very responsive and helpful, competitive pricing. Good source! "

July 2025

Andrew Gar**** Verified Buyer

" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "

March 2025

Said Sai**** Verified Buyer

" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "

January 2025

Bob C**** Verified Buyer

" Jason was able to get our emergency situation taken care of quickly and professionally. "

May 2025

Gregg Flecki**** Verified Buyer

" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "

January 2025

National Instruments PXI-2514 PXI Signal Insertion Switch Module

The National Instruments PXI-2514 Fault Insertion Unit (FIU) is intended for loop hardware (HIL) applications and electronic dependability testing. Every module has a set of direct-feed channels that can be opened or closed to one or more failover buses. The user can utilize this architecture for symmetrical open or interfered connections and in addition short between pines, shorts in battery voltages and shorts on the ground per channel. When controlled by the LabVIEW Real-Time Module, the PXI-2514 (Part Number: 778572-14) is perfect for approving the trustworthiness of control frameworks, including engine control units (ECU) and full specialist authority digital engine (FADEC).

Each FIU module can send and get triggers through the PXI-2514 backplane. Input triggers can advance the switch to the fault area in a predefined list loaded onto the FIU hardware. The user can utilize output triggers to start estimations on different instruments in the PXI-2514’s framework. Moreover, the user can also send triggers from real-time recreations to sequence through fault conditions for automated test coverage. For applications requiring more complex sequencing and dynamic fault control, you can utilize a PXI-2514 field programmable gate array (FPGA) module to send and get triggers to at least one FIU by means of the PXI backplane

While in the Windows condition, the PXI-2514 allows the user to interactively configure and test PXI switches with the NI-SWITCH Soft Front Panel. For automated control, the included NI-SWITCH hardware driver gives automatic access to the full functionality of every module. Utilizing the NI-SWITCH hardware driver, the user can control connections exclusively or download an output list to the FIU hardware to start hardware-timed sequences of connections.

Apex Waves will continue to Buy, Sell, and Repair EOL NI Hardware in perpetuity. While the PXI-2514 entered the NI Maintenance phase on June 30, 2022, it will remain available with Apex Waves. Request your quote today!

Model	PXI-2514
Manufacturer	National Instruments
Part Number	778572-14
Type	Signal Insertion Switch Module
Channels	7
Switch Bandwidth	800 kHz
Minimum Pulse Width	150 ns
Dimensions	8.5 x 1.6 x 5.1 in.
Weight	18.1 oz.
Warranty	2-3 Year Warranty
PXI-2514 Manual	User Manual and Maintenance Manual Available for Download
Price	Contact a sales representative for a quote.

Associated part numbers for PXI-2514:

National Instruments PXI-2514 Frequently Asked Questions

Question: What are the dimensions of the PXI-2514?

Answer: The PXI-2514 is 8.5 (L) x 1.6 (W) x 5.1 (H) in.

Question: What is the maximum switching power of the NI PXI-2514?

Answer: The maximum switching power of the NI PXI-2514 is 1,120 W for each channel.

Question: What is the operating temperature range for the PXI-2514?

Answer: The PXI-2514 has an operating temperature range of 0 to 50 degrees C.

Question: Which accessories are available for use with the PXI-2514?

Answer: The PXI-2514 has two accessories available: the DB8F-40A Cable (To 8-pin DSUB), 1 m (Part number: 781092-01) and the DB8F-40A Cable (To Bare Wire), 1 m (Part number: 781092-02).