Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
OP-8934 Request for Availability
OP-8934, 16 Channels, Fault Insertion Included, Analog I/O Module
Rated 4.9/5 | 10 ratings
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Ground Shipping
✔ NIST Calibration Available
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Carol Zimme**** Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
National Instruments OP-8934 Analog I/O Module for SLSC
The 16-channel analog I/O module OP-8934 (Part Number: 787856-01) from National Instruments is intended for use in Switch Load Signal Conditioning (SLSC) applications. This module is a flexible tool for testing and simulation in a range of industrial situations since it has 16 analog outputs and onboard Fault Insertion Unit (FIU) capabilities for each signal.
Although the OP-8934 can be integrated seamlessly with PXI or CompactRIO hardware, it does require the right cabling and rear transition interfaces. In order to replicate actual signal failures and improve system resilience, it is made to operate with the NI SLSC-12001 platform.
This module, which is organized into two 8-channel OP8Gxx modules, integrates FIU and analog signal conditioning on a single board. The analog input (Ain) and analog output (Aout) circuits can be set up by users to meet different conditioning requirements. Under the direction of a CPLD, the FIU division oversees the identification, configuration, and error reporting of the NI environment, guaranteeing accurate and dependable operation. Software configurations for the FIU and specific I/Os are also sent to it.
The robust and comprehensive fault insertion capabilities of the OP-8934 are impressive. For a total of 112 relays (7x16), there are seven relays in each differential pair of signals in the FIU section. Different fault circumstances can be accommodated by separately controlling each relay. Two fault injections using user-supplied voltage references (VBusA and VBusB) for each signal in the pair, as well as the pair's open circuit and short circuit are all possible fault scenarios.
Faster response times (less than 0.5 ms) and increased density are made possible by the relay technology utilized in the FIU. However high currents can harm the relays because this technology is susceptible to them. In order to minimize peak currents, users must add resistors to the signal or VBus depending on the circuit's capacitor and cabling. Peak currents over 5A can result in irreversible relay damage, even in the presence of power supply limits.
| Model Name | OP-8934 |
|---|---|
| Part Number | 787856-01 |
| Part Type | Analog I/O Module for SLSC |
| Channels | 16 |
| Fault Insertion | Yes |
| Compatibility | PXI, CompactRIO, NI SLSC-12001 |
| Analog Output Configuration | User-configurable Ain and Aout |
| FIU Relay Count | 112 (7 per differential pair) |
| Relay Response Time | Less than 0.5 ms |
| Embedded Protections | Prevents VBusA and VBusB short circuits, default open relay state |
Associated part numbers for OP-8934:
OP-8934 PDF Manuals
Delivery:
No hassle return policy.
Dedicated customer service team.
Payment:
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos:
Why Buy From Apex Waves:
